DQ96x - WATT AND VAR METER
- Precision true rms measurement of Watt or VAr, not affected by heavily distorted current or voltage waveform
- Single phase, 3-wire or 4-wire, 32-70Hz systems
- For use with 1A or 5A current transformers
- Linear scale with normal or displaced zero
The digitally controlled DQ96x measures unbalanced and balanced active power. (W) or reactive power (VAr) in single phase, 3-wire or 4-wire (with neutral) three phase systems.
The unit measures the zero point crossing and the true rms current and voltage value, and its accuracy is independent of any wave form distortion.
This DIN96 class 1,5 meter has low-reflection glass to ease reading at a distance.
The instruments are individually scaled and calibrated, and can be supplied with a displaced zero to monitor reverse power.
The unit meets IEC60092-504 and the relevant environmental and EMC tests specified in IEC60068/60092 and IEC61000/60533 respectively, to comply with the requirements of the major Classification Societies.
Shown below are designations for the available circuit configurations:
ACTIVE POWER (W)
- DQ96-1W2E - 1 element, Single phase
- DQ96-1W3E - 1 element, 3 phase, 3 wire, balanced load
- DQ96-1W4E - 1 element, 3 phase, 4 wire, balanced load
- DQ96-2W3E - 2 element, 3 phase, 3 wire, unbalanced load
- DQ96-3W3E - 3 element, 3 phase, 3 wire, unbalanced load
- DQ96-3W4E - 3 element, 3 phase, 4 wire, unbalanced load
REACTIVE POWER (VAr)
- DQ96-1R2E - 1 element, Single phase
- DQ96-1R3E - 1 element, 3 phase, 3 wire, balanced load
- DQ96-1R4E - 1 element, 3 phase, 4 wire, balanced load
- DQ96-2R3E - 2 element, 3 phase, 3 wire, unbalanced load
- DQ96-3R3E - 3 element, 3 phase, 3 wire, unbalanced load
- DQ96-3R4E - 3 element, 3 phase, 4 wire, unbalanced load
