KCM13x Series

KCM13x - ANALOGUE GUARD / LEVEL CONTROLLER

  • Comprises a wide variety of instrumentation for protection, control and regulation of DC electrical parameters or physical parameters
  • DC Voltage or Current Guards and Controllers
  • DC Signal Slave Controllers
  • Analogue Signal Controllers
  • Triple relay for more flexibility
  • Up to two individual very fast analogue output signals (<50mS), (optional)
  • DIN96 Slave Indicator with status LEDs (optional)
Application
The KCM13x is a digitally controlled guard/controller for use in a large range of applications such as power guards, load controller, DC current guards, DC voltage guards, etc. As an analogue controller it can be used to monitor a large range of physical parameters as flow, pressure, temperature, length, weight and more.

 The standard models takes the auxiliary supply voltage from the monitored voltage (terminal 1 & 2).

It can also be delivered with optional separate DC auxiliary voltage (terminal 26 & 27), but that must be specified when ordering (see page 4 for ordering code for separate Aux. Supply).

User settable trip levels and delays. Colour of LEDs indicate alarm status. Alarm LEDs flash during count-down.

The DIN-rail mounted instrument reads the monitored parameter. The optional slave watt-meter and the triple-zone status LEDs at a glance gives the clear safety message, typically:
  • HIGH
  • LOW
  • NORMAL
Outputs
Up to two individual very fast analogue output signals (optional) proportional to monitored parameters. This may be used as an input to a control system, to detect abnormal power conditions (loss of excitation etc). If output is used for remote meter reading, we recommend 0-1mA for the slave indicator.

Relay Outputs
Relay operation depends on the selected model. Other combinations are available on request.

Description
 
Analogue Level Controllers / Guards

KCM13M13x
A Low / High Universal Level Controller
 It is operating from mA or volt output of any transmitter or converter for monitoring of most physical parameters like Flow, Volume, RPM, Vibration, Time, Pressure, Temperature, Level, Length, Weight, Angle, RH, Dewpoint, pH, Lux, UV exposure etc. Scaled to customer requirement. The unit has one low and one high alarm relay with adjustable hysteresis.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13M13E
KCM13M13FA  
KCM13M13FB
KCM13M13G
KCM13M13GFA   
KCM13M13GFB
 
KCM13M23x
A two level Universal Level Controller
 It is operating from mA or volt output of any transmitter or converter for monitoring of most physical parameters like Flow, Volume, RPM, Vibration, Time, Pressure, Temperature, Level, Length, Weight, Angle, RH, Dewpoint, pH, Lux, UV exposure etc. Scaled to customer requirement. The unit has one low and one high alarm relay with adjustable hysteresis.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13M23E
KCM13M23FA  
KCM13M23FB
KCM13M23G
KCM13M23GFA   
KCM13M23GFB
 
DC Voltage Guards
 
KCM13V15x
DC Over and Under Voltage  Guard


A DC voltage guard with direct input up to 400VDC. Input from voltage divider with grounded negative for any voltage range. The unit is used for protection of any DC motor or mains.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13V15E
KCM13V15FA
KCM13V15FB
KCM13V15G
KCM13V15GFA
KCM13V15GFB
 
KCM13V16x
DC Bi-Polar Voltage  Guard
A DC voltage guard with direct input up to +/- 400VDC. Input from voltage divider with grounded negative for any voltage range. The unit is used for protection of any DC motor or mains.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13V16E
KCM13V16FA
KCM13V16FB
KCM13V16G
KCM13V16GFA
KCM13V16GFB
 
Power Guards

KCM13M173x
Bi-Directional Active (kW) Power Guard
It is operating from mA output of a matching kW power transducer, it monitors forward and reverse active load of generators. The unit has one overload and two reverse power relay. The overload relay have adjustable hysteresis and can be used to release and re-entry non essential load.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13M173E
KCM13M173FA
KCM13M173FB
KCM13M173G
KCM13M173GFA
KCM13M173GFB
 
KCM13M193x
Bi-Directional Reactive (kVAr) Power Guard
It is operating from mA output of a matching kVAr power transducer, it monitors forward and reverse active load of generators. The unit has one overload and two reverse power relay. The overload relay have adjustable hysteresis and can be used to release and re-entry non essential load.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13M193E
KCM13M193FA
KCM13M193FB
KCM13M193G
KCM13M193GFA
KCM13M193GFB
 
Power Controllers / Guards
 
KCM13M151x
AC Power Controller
It is operating on a output from the MCE105 generator controller or from any low level DC signal i.e. 0-5V, 4-20mA etc. When used as a “Total power” instrument it monitors the combined output of a generator system. The relays can be used to automatically start and stop generators in a simple system or for preferential tripping. As a “Surplus power” instrument, it monitors the remaining available power and therefore the relays can be used for load blocking of heavy loads.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13M151E
KCM13M151FA
KCM13M151FB
KCM13M151G
KCM13M151GFA
KCM13M151GFB
 
KCM13M154x
AC Power Controller
It is operating on a output from balance lines from the MCE105 generator controller or from any low level DC voltage signal i.e. 0-5V, 0-8V etc. By monitoring the load balance lines of the MCE105, the instrument will indicate the total percentage of power from the generators in use regardless of the number of generators running. The trip relays can be used to automatically start and stop generators based purely on percentage of generated power. Scaled with 0-100%kW.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13M154E
KCM13M154FA
KCM13M154FB
KCM13M154G
KCM13M154GFA
KCM13M154GFB
 
Current Guards

KCM13C121x
DC Over and Under Current Guard
Direct input up to 1ADC, input from standard 60-150mV measuring shunt from 1ADC to 30.000ADC. The unit is used for selective current protection of DC loads such as motors, generators etc. Relays are differential configured.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13C121E
KCM13C121FA
KCM13C121FB
KCM13C121G
KCM13C121GFA
KCM13C121GFB
 
KCM13C123x
DC Two Level Over Current Guard
Direct input up to 1ADC, input from standard 60-150mV measuring shunt from 1ADC to 30.000ADC. The unit is used for selective current protection of DC loads such as motors, generators etc. Relays are cascade configured.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13C123E
KCM13C123FA
KCM13C123FB
KCM13C123G
KCM13C123GFA
KCM13C123GFB
 
KCM13C126x
DC Bi-Polar Current Guard
Direct input up to 1ADC, input from standard 60-150mV measuring shunt from 1ADC to 30.000ADC. The unit is designed for both level and polarity of DC current to provide dual polarity excess current protection like a charge/ discharge guard. Relays are differential configured.

Relay trip lamps flash instantly (approx. 1 flash per second) when the trip level is passed, the relay trips after elapsed delay. The lamp changes state and the trip relay operates after the pre-set delay. If a trip condition ends during the delay interval, the timer will automatically reset (only on Non-Latching models).
 
Models
KCM13C126E
KCM13C126FA
KCM13C126FB
KCM13C126G
KCM13C126GFA
KCM13C126GFB 
 
  
 

 

Web solution by Digitroll